✔ Engineering and Automation Solutions

End-to-End Automation Solutions From project to commissioning, from hardware to software, under one roof

At YOMLAB we support process and energy facilities at every stage, from the first assessment of needs to years of trouble-free operation. We select the field devices, design the control centre, set up the software, commission the system and stay with you afterwards.

We connect both the equipment already in your facility and newly installed equipment to a single SCADA system, so you can monitor and manage the entire facility from one centre.

What we offer

Project and engineering

We take on all the engineering work needed to turn an automation project from an idea into a working system.

  • Site survey and needs analysis
  • Design of field devices and the control centre
  • PLC, RTU and SCADA programming
  • Communication architecture and signal lists

Hardware supply

We select and supply the hardware the project needs, taking your brand preferences into account.

  • RTUs, PLCs and IEDs
  • Power analysers and meters
  • Measuring instruments and transmitters
  • Communication equipment and operator panels

Software platforms

We are not tied to one software; we recommend the platform that best fits your facility and budget.

  • Siemens SCADA solutions
  • Schneider Electric SCADA solutions
  • Zenon and Wonderware
  • Our own web-based ATLAS SCADA

Commissioning, maintenance and support

Our responsibility does not end once the system is running.

  • Site tests and commissioning
  • Operation and periodic maintenance of SCADA systems
  • After-sales technical support
  • Training for operators and technical staff

↑ Back to top

Where do we work?

We deliver turnkey SCADA and PLC/RTU-based solutions on both the process and the energy side:

  • Energy facilities: Power plants, transmission and distribution substations
  • Industrial facilities: Factories, production lines and utilities
  • Organised industrial zones: Power distribution and infrastructure systems
  • Rail systems: Monitoring of power supply and auxiliary systems
  • Water and wastewater treatment plants: Pump stations, reservoirs and treatment processes

↑ Back to top

How does a turnkey project progress?

Every stage is run by a single team, so work and responsibility do not get lost between different companies.

Surveyneeds and current stateDesignarchitecture and signal listSupplyhardware and softwareProgrammingPLC, RTU, SCADATest and commissioningfactory and site testsTraining and supportoperation period

Devices already installed on site are integrated without being removed, and new equipment is connected to the same structure. The result: equipment of different brands and ages is monitored and controlled from a single centre.

↑ Back to top

Featured applications

Load shedding / load restoration automation

When supply capacity falls short, for example when a source drops out, the system automatically disconnects non-critical loads according to a predefined priority order. When capacity returns, loads are brought back in sequence and in a controlled way. This keeps critical loads powered and prevents a full blackout of the facility.

Energy transfer automation

When there is a problem with one supply source, loads are automatically transferred to another, for example between two grid feeders or between the grid and a generator. The changeover follows a safe sequence based on breaker positions and voltage information.

SCADA modernisation and revision

Unsupported operating systems, servers without spare parts or old SCADA software that can no longer be updated are a serious risk. We move the system to a new platform while keeping existing field devices wherever possible, and plan the migration in stages without stopping the facility.

↑ Back to top

Substation SCADA Monitoring and Control Automation

We carry out communication and SCADA applications in 380/154 kV TEİAŞ substations. We set up and test communication between relays, bay controllers, RTUs and control centres in line with the relevant standards.

ProtocolWhere we use it
IEC 60870-5-101RTU – control centre communication over serial lines
IEC 60870-5-104Connecting substations and power plants to control centres over TCP/IP
IEC 61850Communication between protection relays, IEDs and the station SCADA inside the substation
DNP3Time-stamped event communication with RTUs at remote sites
Modbus Serial / TCPBringing analysers, meters, drives and auxiliary equipment into the system

↑ Back to top

Bolt, Nut, Screw and Nail Plating Robot Automation

We provide fully automatic single-robot and dual-robot solutions for surface plating lines used to increase the corrosion resistance of fasteners such as bolts, nuts, screws and nails. The robot carries product-filled barrels between baths in the sequence and for the times defined in the recipe; operator workload goes down and plating quality stays the same in every batch.

Supported plating processes

The line can be run with recipes for different plating types.

  • Electrolytic acid zinc plating
  • Alkaline zinc plating
  • Electro-galvanising applications
  • Different plating technologies such as thermal diffusion

Single and dual robot operation

Depending on the required capacity, the line is built to run with one robot or two.

  • Single robot: simpler structure, for medium-capacity lines
  • Dual robot: two robots share the work on the same line without colliding
  • Higher capacity and shorter cycle times

What does automation bring?

  • Speed: Barrels are moved without waiting, in the best order; line capacity increases.
  • Repeatable quality: Bath times and transfer order are not left to human error; every batch gets the same coating.
  • Corrosion-resistant products: A stable process makes it easier to produce rust-resistant products.
  • Easy management: Recipe selection, line status, alarms and production records are monitored from the operator panel and SCADA.
  • Traceability: Which batch was plated with which recipe and when is kept on record.

↑ Back to top

Smart Conveyor Automation for Waste Facilities

In waste sorting and recycling plants, material moves along many interconnected conveyors. If one conveyor stops while the others keep running, material piles up, belts get damaged and the plant stops for a long time. Our smart conveyor automation manages the whole line as one system and prevents these problems from the start.

Smart line management

  • Starting and stopping conveyors in the correct order, in a controlled way
  • When one conveyor stops, the conveyors feeding it stop automatically
  • Instant alarms for blockages, belt slip and motor faults
  • Integration of emergency stops and pull-cord safety switches

Easy to use

  • Simple, clear HMI screens
  • A SCADA screen showing the whole line at a glance
  • Alarm list showing where and why a fault occurred
  • Reports on running hours, stoppages and energy use

Thanks to our practical HMI and SCADA designs, operators can easily manage all conveyors in the plant from a single point, and maintenance teams see where a fault is on screen instead of searching for it on site.

↑ Back to top

Brands we work with

We are not tied to any single manufacturer. We work with the brands used in your facility or the ones you prefer, and bring different brands together in one system.

  • ABB
  • GE
  • Siemens
  • Omron
  • SEL
  • Delta

Contact us for brands not listed here as well.

↑ Back to top

Why YOMLAB?

  • Single point of contact: Engineering, hardware, software and support come from the same team.
  • Vendor independence: We recommend the solution that suits you, not a particular product.
  • Process and energy experience: We know facility types from factories to substations.
  • Our own software: With web-based ATLAS SCADA we can offer solutions shaped around your needs.
  • Training: When we hand over the system, we make sure your team can use and manage it.

↑ Back to top

Let's build the right solution for your facility together

A new plant, an extension of an existing system or the renewal of an old SCADA… Tell us what you need and we will work out the plan with you, from site survey to commissioning.

Let's talk about your project